Mastering Tutorial: iZotope Ozone 5 EQ & Harmonic Exciter – Part 2


Mastering Tutorial: iZotope Ozone 5 EQ & Harmonic Exciter – Part 2

iZotope Ozone 5 EQ & Harmonic Exciter – Part 2 – In this tutorial I introduce you to the EQ and Harmonic Exciter Modules in iZotope Ozone 5. With a quick preview of the Maximizer at the end of the video!

Topics covered include:
–EQ–
Setting EQ Types
Setting EQ Nodes (Bands) – Frequency / Boost or Cut in dB / Q (Width)
Using the Spectrum to Adjust EQ Nodes
Reseting EQ Nodes
EQ Modes – Analog / Digital / Matching
Brief Explanation of Matching with Snapshots
Alt-Solo Feature
EQ Options
–Harmonic Exciter–
Amount & Mix Options
Exciter Mode – Warm / Tube / And More…
Selecting Crossover Bands (1-4 bands)
Crossover Type and Options
Solo’ing and Bypassing Individual Bands
Adjusting Low-Pass Post Filter
–Maximizer–
Brief introduction to the Maximizer which will be gone over in greater detail in a later tutorial.

Here’s part 2 of my iZotope Ozone 5 series. In this video I give an overview of the EQ and Harmonic Exciter Modules – with a demonstration of some parameters introduced to a house music track. Keep in mind that these parameters (along with the supplied presets) can be good starting points… but you will need to further modifying these parameters to suit the track you are mastering.

Don’t forget to watch part 1 of the series which introduces you to the Ozone 5 Interface.

Download a trial version of Ozone at: http://www.izotope.com/products/audio/ozone/

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,